Tables/Benches

L.A. Steelcraft

Fiberglass Tables

TRADITIONAL RECTANGLE TABLE WITH ATTACHED BENCHES

TP8-FA

Fiberglass top and seats with steel spine for no sagging. Easy access, no frame interference for seats. Seats 6 to 8 people.
OPTIONAL: Adding Recta-Brella, requires 2 umbrella holes at additional charge.
OPTIONAL: If anchoring, 2 anchor straps (TP-A) are required at additional charge.

table w umbrella

Optional Umbrella Available

table insert

 

 

 

 

 

 

 

Optional Anchor Strap Model No. TP-A , 2 required for this model


ModelLengthOverall WidthTop WidthTop HeightSeat HeightWeightPriceDownload3D Download
TP8-FA8'65"30"29"18"180 lbs.$964.00
TP8-FJ8'62"30"25"15 - 1/2"175 lbs.$964.00
TP6-FA6'65"30"29"18"150 lbs.$854.00
TP6-FJ6'62"30"25"15 - 1/2"145 lbs.$854.00
TP6-FN6'56"30"21"13 - 1/2"135 lbs.$854.00
TP8-FN8'56"30"21"13 - 1/2"165 lbs.$964.00


PARTS AND ACCESSORIES FOR THE TRADITIONAL RECTANGLE TABLE

*Indicate Adult or Junior and table length.

ModelDescriptionWeightPriceDownload3D Download
TP8-TFiberglass Top, 30” W x 8’ L65 lbs.$440.00
TP6-TFiberglass Top, 30” W x 6’ L50 lbs.$354.00
TP8-SFiberglass Seat, 10” W x 8’ L31 lbs.$182.00
TP6-SFiberglass Seat, 10” W x 6’ L24 lbs.$168.00
TP-FFrames*48 lbs.$250.00
TP-BBraces*5 lbs.$47.00
TP-AAnchor Strap (optional)2 lbs.$14.00
Rectangle Tables require 2 brackets
UH-2Umbrella Holes upon request-24 lbs.$30.00
Rectangle Tables require 2 holes
PKFiberglass Patch Kit, indicate color4 lbs.$33.00
LOTS OF FIBERGLASS COLORS TO CHOOSE FROM!

KING ARTHUR ROUND TABLE WITH ATTACHED BENCHES

Fiberglass top and seats, with steel spine for no sagging. Easy access for 8 people. OPTIONAL: If adding an Aluminum or Fiberglass umbrella, requires 1 umbrella hole at additional charge. For anchoring, 4 anchor straps (TR-A) are required at additional charge.

ModelDiameterTop HeightSeat HeightOverall WidthWeightPriceDownload3D Download
TRF-48A48"29"18-1/2”77-1/2”179 lbs.$998.00
TRF-54A54"29"18-1/2”77-1/2”192 lbs.$1,088.00
TRF-54N54"21"13-1/2”77-1/2”187 lbs.$1,085.00

King Arthur with umbrella

Submerged Steel Spine Insert

Submerged Steel Spine Insert


UH-1

Optional Umbrella Hole For Umbrellas see end of page


PARTS AND ACCESSORIES FOR THE KING ARTHUR ROUND TABLE

*Indicate Adult or Nursery for frames and centering disc.

ModelDescriptionWeightPriceDownload3D Download
TRF-A/NFrames with centering disc*89 lbs.$333.00
TRF-48Fiberglass top, 48” diam.38 lbs.$336.00
TRF-54Fiberglass top, 54” diam.44 lbs.$370.00
TRF-S“Kidney Seat”13 lbs.$132.00
TR-AAnchor Strap (optional)1 lb.$6.00
Round Tables require 4 brackets
UH-1Umbrella hole upon request2 lbs.$15.00
Round Table requires 1 hole
CDCentering Disc*4 lbs.$32.00


ROUND TABLE WITH ATTACHED INDIVIDUAL STOOLS

1-5/8” OD galvanized pipe for frames. Fiberglass top with steel spine for no sagging. 8 individual stools for easy access. (Available with umbrella hole at additional charge. Required for use with round Fiberglass or Aluminum umbrellas. Optional anchor straps available at additional cost. 4 brackets (TR-A) are required on this model if anchoring.)


ModelDescriptionTop Diam.Top HeightSeat HeightOverall WidthWeightPriceDownload3D Download
TRF8-48F/G Round Table48"29"18-1/2”81"149 lbs.$1,308.00
TRF8-54F/G Round Table54"29"18-1/2”81"155 lbs.$1,361.00


TRF8-54

PARTS AND ACCESSORIES FOR TRF8 SERIES

ModelDescriptionWeightPriceDownload3D Download
TRF-4848” Diam. Top Only38 lbs.$336.00
TRF-5454” Diam. Top Only44 lbs.$370.00
RS-1212” Diam. Stool Only8 lbs.$98.00
TRF-ASFrame only89 lbs.
TR-AAnchor Strap (optional)1 lb.$6.00
UH-1Umbrella Hole upon request only (1 required)2 lbs.$15.00
CDCenter Disc4 lbs.$32.00

RUGGED HEAVY DUTY PEDESTAL FIBERGLASS TABLE

2” square tubular frames, powder coated finish, double pedestal legs per  bench. Surface mount frame comes with 6” x 6” plates. (Available with umbrella hole on request for an extra charge.)

ModelDescriptionTop Diam.Top HeightSeat HeightWeightPriceDownload3D Download
48-TPCDirect Bury48"30"18"225 lbs.$1,267.00
48-TPPSurface Mount48"30"18"215 lbs.$1,252.00
54-TPCDirect Bury54"30"18"245 lbs.$1,320.00
54-TPPSurface Mount54"30"18"235 lbs.$1,308.00

48-TPC

PARTS AND ACCESSORIES FOR TPC/TPP SERIES

Specify direct bury or surface mount frame.

ModelDescriptionWeightPriceDownload3D Download
TP-48FFrame only for 48”90 lbs.$419.00
TP-54FFrame only for 54”95 lbs.$443.00
TRF-S“Kidney Seat”13 lbs.$132.00
TRF-48Fiberglass Top 48” Diam.38 lbs.$336.00
TRF-54Fiberglass Top 54” Diam.44 lbs.$370.00
UH-1Umbrella Hole2 lbs.$15.00

FRO12BC

Skate Stoppers protect your tables and benches from the damage skateboarders can do. These Stoppers are specially designed for fiberglass surfaces. Suggested to be used every 6” inches along the rails of tops and seats. Sold in kits of 20, 60, 100 or 250. All kits include application hardware.

ModelDescriptionPriceDownload3D Download
FRO12BCWood, Fiberglass or Aluminum
FRO25PCExpanded Metal (Not Shown)

EXTRA STRENGTH RECTANGLE TABLE AND BENCHES WITH REINFORCED SUPPORT BRACING

1- 5/8” OD galvanized tubular frames. 1-1/16” OD galvanized support bracing under top and each bench with 1/2” tie bar. Galvanized foot pad welded to leg frames for added stability. No anchor strap required.

Lots of fiberglass colors to choose from!

TP-3026


ModelDescription Top Diam.Top HeightSeat HeightOverall WidthWeightPriceDownload3D Download
TP-3026F/G HD Support30” x 96”26"15-1/2”65"195 lbs.$1,174.00
TP-3030F/G HD Support30” x 96”30"18"65"205 lbs.$1,174.00
TP-30FFrame Only----85 lbs.$486.00


PARTS AND ACCESSORIES FOR TP-30 SERIES

*Indicate 26” or 30” height for frames.


ModelDescriptionWeightPriceDownload3D Download
TP-30FFrames Only 26” or 30”*85 lbs.$486.00
TP-30BBraces Only (set of 3)34 lbs.$185.00
TP8-T30” x 96” top only65 lbs.$440.00
TP8-SFiberglass seat 10”W x 8’ L31 lbs.$182.00
UH-2Umbrella Holes (2)4 lbs.$30.00


TP4-TBF

PEDESTAL FRAME DESIGN EXTRA STRENGTH RECTANGLE TABLE AND BENCHES W/ REINFORCED SUPPORT BRACING

1- 5/8” OD galvanized tubular frames. 1-1/16” OD galvanized support bracing under top and each bench with 1/2” tie bar. Galvanized foot pad welded to leg frames for added stability. No anchor strap required. 1-5/8” OD galvanized steel pipe. Built to seat 4 comfortably. Perfect for small families. Meets the need of fast food industry. This table should be used in a fixed location with frame anchored. Anchor straps available at additional charge.

ModelDescriptionTop Diam.Top HeightSeat HeightOverall WidthWeightPriceDownload3D Download
TP4-TBF4 Seater30” x 48”30"18"60"90 lbs.$716.00


PARTS AND ACCESSORIES FOR TP4-TBF SERIES

ModelDescriptionWeightPriceDownload3D Download
TB4-T30” x 48” top only41 lbs.$271.00
TB4-S10” x 48” seat only20 lbs.$155.00
TP-AAnchor Strap2 lbs.
PKFiberglass Patch Kit4 lbs.$33.00


Food Court Tables

TRF-35S

TRF-35S ROUND TOP TABLE WITH SEPARATE ROUND SEATS FOR PERMANENT INSTALLATION

Round top table with separate round seats for in-ground installation. Table Frame: 2-7/8” OD pipe with powder-coated finish. Stool Frame: 2-3/8” OD pipe with powder-coated finish. Seat: 12” diameter fiberglass. Ideal for fast food areas. Optional surface mount (add SM to model number) at additional charge. (Available with umbrella hole on request, for an extra charge).

ModelTop DiameterTop HeightSeat HeightOverall WidthWeightPriceDownload3D Download
TRF-30S30"29"18"Adjust.95 lbs.$926.00
TRF-35S35"29"18"Adjust.100 lbs.$975.00

TCF-35S ROUND TOP TABLE WITH ROUND SEATS ATTACHED TO A SINGULAR CENTER COLUMN

Round fiberglass top table with individual round seats attached to center column. Frames 2” sq. tubular steel with powder coated finish. Seat: 12” diameter fiberglass. Ideal for fast food areas. Optional surface mount (add SM to model number) at additional charge. (Available with umbrella hole on request, for an extra charge).

ModelTop DiameterTop HeightSeat HeightOverall WidthNo. of SeatsWeightPriceDownload3D Download
TCF 35S-435"29"18"67"4120 lbs.$1,179.00
TCF 35S-535"29"18"67"5125 lbs.$1,244.00
TCF 35S-635"29"18"67"6130 lbs. $1,568.00
TCF 30S-430"29"18"67"4105 lbs.$1,065

TCF 35S-4

TRF-30T/4 ROUND TABLE WITH SUPPORTED STOOLS

Round fiberglass table with supported stools. For deck mount installation (as shown) add “D” to model number. 2” square tubular steel frames with powder coated finish. 12” diameter seats. Ideal for fast food areas. (Available with umbrella hole on request, for an extra charge).

Model Top DiameterTop HeightSeat HeightOverall WidthWeightPriceDownload3D Download
TRF-30T/430"29"18"62"130 lbs.$1,032.00
TRF-35T/435"29"18"67"140 lbs.$1,076.00

PARTS AND ACCESSORIES FOR ROUND FOOD COURT TABLES

ModelDescriptionWeightPriceDownload3D Download
TCF-30T30” Diam. top only32 lbs.$273.00
TCF-35T35” Diam. top only38 lbs.$314.00
RS-1212” Diam. stool only8 lbs.$98.00
UH-1Umbrella Hole (1)2 lbs.$174.00

TBW-RECTANGLE TOP TABLE WITH BUCKET SEATS TBW-4 RECTANGLE TOP TABLE WITH BENCH SEATS

Rectangle fiberglass top table with four bucket seats. 2” square tubular steel frame with a powder coated finish. Fiberglass seats are veiled bucket style (standard seat color is white. Other colors are available at extra charge). Ideal for fast food areas.

ModelDescriptionTop SizeTop HeightSeat HeightOverall WidthWeightPriceDownload3D Download
TBW-4BDeck Mount30” x 48”29"18"48” x 76”118 lbs.$1,265.00
TBW-4BPPermanent30” x 48”29"18"48” x 76”122 lbs.$1,265.00

TBW-4

TBW-4 RECTANGLE TOP TABLE WITH BENCH SEATS

Fiberglass rectangle table with bench seats for portable or permanent installation. 2” square tubular steel with powder coated finish. Seat is 2” x 10” fiberglass with steel insert. Ideal for fast food areas.

ModelMountTop SizeTop HeightSeat HeightOverall WidthWeightPriceDownload3D Download
TBW-4Deck-Mount30” x 48”29"18"48” x125 lbs.$1,115.00
TBW-4PPermanent30” x 48”29"18"48” x130 lbs.$1,115.00

EARLY CHILDHOOD ULTRACOAT EXPANDED METAL TABLES

These children’s tables are designed for the “little people” in our elementary, preschools and daycares. The children’s size tables are made from diamond patterns and reduced in height to accommodate the kids. Special UltraCoat thermo-plastic tables. We offer both a square and rectangular model. Available colors: Green, Blue, Red, Brown, Black, Beige and Burgundy. For other UltraCoat models see the towards end of this page.
Ships from: IL 62278.


ModelDescriptionTop SizeSeat SizeFrame SizeTable HeightSeat HeightWeightPriceDownload3D Download
TPP-46-KT46” Square46” x 46”12” x 36”1-5/8” OD20-1/2”12-1/2”170 lbs.$1,055.00
TPP-48-KT48” Rectangle24” x 48”12” x 48”1-5/8” OD20-1/2”12-1/2”124 lbs.$810.00
TPP-72-KT72” Rectangle24” x 72”12” x 72”1-5/8” OD20-1/2”12-1/2”195 lbs.$937.00


Stand Alone Tables

UTILITY TABLE

Excellent table for conference rooms, workshops, laundry room, etc.. Utility table- 1-5/8” OD galvanized steel frames.

ModelTop SizeTop HeightSeat HeightOverall WidthWeightPriceDownload3D Download
TP8-FFA30” x 96”29"N/A30” x 96”114 lbs.$696.00
TP6-FFA30” x 72”29"N/A30” x 72”95 lbs.$597.00
TP8-FFJ30” x 96”25"N/A30” x 96”112 lbs.$677.00
TP6-FFJ30” x 72”25"N/A30” x 72”93 lbs.$581.00
TP-FFFrames-adult or junior---54 lbs.$195.00
TP8-TFiberglass top, 30”W x 8’L---65 lbs.$440.00
TP6-TFiberglass top 30” W x 6’L---50 lbs.$354.00

TP6-FFA

TRF-54FFN

BALLERINA ROUND TABLE

Round table without seats- 1-5/8” OD galvanized steel frames. Ideal for nurseries, patios, work tables, etc. (Available with umbrella hole on request, for an extra charge.)

ModelTop SizeTop HeightSeat HeightOverall WidthWeightPriceDownload3D Download
TRF-48FFA48”29"N/A60"72 lbs.$509.00
TRF-54FFA54"29"N/A60"89 lbs.$581.00
TRF-54FFN54"21"N/A60"87 lbs.$581.00
TRF-FFFrames Only (Specify Adult or Junior Frames)---30 lbs.$238.00
CDCenter Disc (Specify Adult or Junior Size)---4 lbs.$32.00
TRF-48Fiberglass Top 48” Diam.---38 lbs.$336.00
TRF-54Fiberglass Top, 54” Diam.---44 lbs.$370.00

CLIO STAND-UP TABLE

The Hyperion Clio Stand-Up Table is perfect for food courts and other stand-up locations. Features rotosteel, a hybrid of rotationally molded polyethlene and steel, to support our fiberglass tops. Has a 48” or 54” diameter top and stands at a height of 40”. Tables have been carefully designed for easy flexible installation. They can be permanently anchoredto masonry surfaces, or filled with water or sand for Semi-Permanent installations.

Hyperion Color Selection: Sand, Steel Gray or Sea Green.

ModelHeightWeightPriceDownload3D Download
Clio-4842” (48” Diam.)130 lbs.$684.00
Clio-5442” (54” Diam.)160 lbs.$763.00

ADA-Accessible & Specialty Tables

All Weather

These much needed styles of picnic tables feature extended height to allow for comfortable wheelchair access. Frames: 1-5/8” OD galvanized steel pipe. Braces: 1” OD galvanized steel pipe. Top and seat: Steel reinforced heavy duty fiberglass shells. All tables can be adapted for use with umbrellas. All these tables should be used in a fixed location with frames anchored. 10” nominal plank seating.

TP8-FW1

ADA TRADITIONAL RECTANGLE TABLE

Traditional all-purpose rectangle table seats 6 on 6’ long benches on two sides of table and also allows access of up to 2 wheelchairs on ends of table. Requires 2 anchor brackets (TP-A) at additional charge. See top of page for anchors.

ModelDescriptionTop SizeTop HeightSeat HeightOverall WidthWeightPriceDownload3D Download
TP8-FW1Wheelchair30” x 96”31"17-1/2”65"170 lbs.$919.00

ADA DIAGONAL RECTANGLE TABLE

All purpose rectangle table seats for 6 people with staggered 6’ long offset benches on 2 sides of table and allows for access of up to 1 wheelchair on each side. This table should be used in a fixed location with frames anchored. Requires two TP-A anchor straps at additional charge. See top of page for anchors.

ModelDescriptionTop SizeTop HeightSeat HeightOverall WidthWeightPriceDownload3D Download
TP8-FN1MWheelchair30” x 96”31"18-1/2”65”170 lbs.$919.00
TP8-FN1MJRWheelchair30” x 96”23"13-1/2”65”165 lbs.$936.00

TRF-48W

ADA KING ARTHUR ROUND TABLE

Traditional King Arthur Round Table adapted to seat 4 people on 2 kidney seats, plus access for 2 wheelchairs. For anchoring, 4 anchor straps (TR-A) are required at additional charge.

ModelDescriptionTop SizeTop HeightSeat HeightOverall WidthWeightPriceDownload3D Download
TRF-48WWheelchair48"31"17-1/2”77-1/2”155 lbs.$816.00
TRF-54WWheelchair54"31"17-1/2”77-1/2”161 lbs.$862.00

ADA RECTANGLE TABLE WITH SHORT BENCHES

Traditional all-purpose rectangle table seats 4 people with 4’ long benches on both sides of table and also allows for access of up to 2 wheelchairs on each end. This table should be used in a fixed location with frames anchored. Use two TP-A anchors. Anchor straps at additional charge. See top of page for anchors.

ModelDescriptionTop SizeTop HeightSeat HeightOverall WidthWeightPriceDownload3D Download
TP8-FW2Wheelchair30” x 96”31"17-1/2”65"160 lbs.$816.00

P8-FW2

Site Benches

PBF-6-2

MULTI PEDESTAL PARK BENCH

All Weather2” x 1” x 3/16” frames. Hot dipped galvanized channel welded to 1-5/8” OD steel pipes.

ModelDescriptionLengthFramesGround SpaceWeightPriceDownload3D Download
PBF-6/2Pedestal6'22’ x 6’70 lbs.$382.00
PBF-8/2Pedestal8'22’ x 8’84 lbs.$475.00
PBF-12/3Pedestal12'32’ x 12’129 lbs.$707.00
PBF-16/4Pedestal16'42’ x 16’168 lbs.$932.00
PBF-PFFrame only per pair22 lbs.$158.00

PORTABLE CHANNELED PARK BENCH

Frames: 2” x 1” x 3/16” channel with 1/2” rod support. HDG after fabrication. 1” galvanized pipe braces. Specify bench length when ordering frames only.

ModelDescriptionLengthFramesGround SpaceWeightPriceDownload3D Download
PBF-C6Portable6'22’ x 6’70 lbs.$501.00
PBF-C8Portable8'22’ x 8’84 lbs.$596.00
PBF-C12Portable12'32’ x 12’129 lbs.$857.00
PBF-CFFrame only per pair35 lbs.$215.00

PBF-c6

PBP-6

PERMANENT OR PORTABLE PARK BENCHES

Specify bench length when ordering frames only.

Lots of fiberglass colors to choose from!


ModelDescriptionLengthFramesGround SpaceWeightPriceDownload3D Download
PBP-6Portable6'22’6” x 6’95 lbs.$627.00
PBP-8Portable8'22’6” x 8’109 lbs.$662.00
PBP-12Portable12'32’6” x 12’120 lbs.$1,022.00
PBS-6Permanent6'22’ x 6’95 lbs.$637.00
PBS-8Permanent8'22’ x 8’109 lbs.$685.00
PBS-12Permanent12'32’ x 12’120 lbs.$1,037.00
PBP-FPFrame only for portable per pair47 lbs$244.00
PBP-FSFrame only for permanent per pair45 lbs.$219.00

HEAVY DUTY PEDESTAL PARK BENCH

2” x 1” x 3/16” seat and back brackets, hot dipped galvanized channel.
Double 2-3/8” OD galvanized pipe support legs.

ModelDescriptionLengthFramesGround SpaceWeightPriceDownload3D Download
PBF-6/1Pedestal6'12’ x 6’95 lbs.$600.00
PBF-8/1Pedestal8'12’ x 8’109 lbs.$627.00
PBF-6FFrame only 6’ model47 lbs.$268.00
PBF-8FFrame only 8’ model61 lbs.$287.00

PBF-6-1

YBF-6

PORTABLE YARD BENCH

2” x 1” x 3/16” seat and back brackets, hot dipped galvanized channel. Double 2-3/8” OD galvanized pipe support legs. 3/16” x 3” frame with steel spine. Hot dipped galvanized after fabrication. 1.029” OD galvanized steel brace. Ideal for school yards, locker rooms, etc. Specify bench length when ordering frames only.

ModelDescriptionLengthFramesGround SpaceWeightPriceDownload3D Download
YBF-6Portable6'215” x 6’35 lbs.$314.00
YBF-8Portable8'215” x 8’55 lbs.$362.00
YBF-12Portable12'315” x 12’85 lbs.$523.00
YBF-FFrame only per pair21 lbs.$124.00

TRADITIONAL LOCKER ROOM, FIELD AND DUGOUT BENCHES

1-5/8” OD galvanized steel frames.

LBF-8P


ModelDescriptionLengthFramesGround SpaceWeightPriceDownload3D Download
LBF-6P6” x 6” Plate6'210” x 6’39 lbs.$303.00
LBF-8P6” x 6” Plate8'310” x 8’55 lbs.$429.00
LBF-12P6” x 6” Plate12'410” x 12’74 lbs.$601.00
LBF-6CDirect Bury6'210” x 6’37 lbs.$303.00
LBF-8CDirect Bury8'310” x 8’53 lbs.$433.00
LBF-12CDirect Bury12'410” x 12’71 lbs.$606.00
LBF-FPFrame Only with plate per pair (surface mount)18 lbs.$113.00
LBF-FCFrame Only for concrete pair8 lbs.$101.00


ACCESSORIES FOR BENCHES

*Indicate Seat or Back. All our planks are 10” wide. Frames only are listed with bench models. CSF Models are Fiberglass Bench Covers.

ModelDescriptionWeightPriceDownload3D Download
PBF6-S/B6’ Fiberglass Seat or Back*24 lbs.$185.00
PBF8-S/B8’ Fiberglass Seat or Back*31 lbs.$208.00
PBF12-S/B12’ Fiberglass Seat or Back*48 lbs.$266.00
CSF1010” W- 6’, 8’, 12’, 16’ Lengthsper ft.$22.00
CSF1111-1/2” W- 8’, 12’ Lengthsper ft.$23.00

Wood Tables

Wood planking used for all seats and tops on both tables and benches are nominal 2” x 10” (9-1/2” x 1-1/2”) A-1 clear Southern Yellow Pine, DI -65. All planks are kiln dried (KD), surfaced on four sides (S4S) and with eased edges (EE). Planks are available in either natural (ready to finish) or with redwood stained finish.

TP8-HD2

TRADITIONAL HEAVY DUTY PICNIC TABLE WITH BENCHES

2-3/8” OD galvanized frames. 1.029 OD galvanized pipe bracing. All welded end frames with angle top and seat supports.

Natural (ready to finish) or redwood stained finish.


ModelDescriptionTop SizeTop HeightSeat HeightOverall WidthWeightPriceDownload3D Download
TP6-HD2Traditional30” x 72”29"18"68"205 lbs.$763.00
TP8-HD2Traditional30” x 96”29"18"68"240 lbs.$855.00
HD2-WFrame Only----100 lbs.$424.00


THE ORIGINAL “TOUGH ONE”

1-5/8” OD or 2-3/8” OD galvanized steel pipe frames with angle iron plank holders. All welded frames. 1” braces on 1-5/8” and 1-1/4” braces on 2- 3/8”. 2” x 10” nominal planks.


ModelDescriptionTop SizeTop HeightSeat HeightOverall WidthWeightPriceDownload3D Download
TPW-6S1-5/8” Frame30” x 72”29”18”64”184 lbs.$719.00
TPW-8S1-5/8” Frame30” x 96”29”18”64”215 lbs.$810.00
TPW-6HD2-3/8” Frame30” x 72”29”18”64”194 lbs.$790.00
TPW-8HD2-3/8” Frame30” x 96”29”18”64”230 lbs.$870.00
W-S1-5/8” Frame Only----78 lbs.$380.00
W-HD2-3/8” Frame Only----93 lbs.$440.00


STANDARD WOOD PLANK TABLE

All Weather1-5/8” OD or 2-3/8” OD galvanized steel pipe frames with angle iron plank holders. All welded frames. 1” braces on 1-5/8” and 1-1/4” braces on 2-3/8”. 2” x 10” nominal planks.


ModelDescriptionTop SizeTop HeightSeat HeightOverall WidthWeightPriceDownload3D Download
TPW-82GAAdult30” x 8’28-1/2”18”96” x 65”212 lbs.$724.00
TPW-62GAAdult30” x 6’28-1/2”18”72” x 65”197 lbs.$636.00
TPW-82GJJunior30” x 8’25-1/2”15-1/2”96” x 62”190 lbs.$724.00
TPW-62GJJunior30” x 6’25-1/2”15-1/2”72” x 62”185 lbs.$636.00
TPW-GAFrame only- specify junior or adult52 lbs.$303.00


EXTRA STRENGTH WOOD TABLE

1-5/8” tubular galvanized frames. 1-1/16” OD galvanized support bracing under top and each bench with 1/2” tie bar. Galvanized pads welded to leg frames for added stability.


ModelDescriptionTop SizeTop HeightSeat HeightOverall WidthWeightPriceDownload3D Download
TPW-3026HD Wood26"65"15-1/2”65"195 lbs.$920.00
TPW-3030HD Wood30"65"18"65"205 lbs.$920.00
TP-30FWFrame Only85 lbs.$471.00
Indicate Height desired 26” or 30”


Double Plank Tables & Benches

THE ORIGINAL“4 LIVES” DOUBLE PLANK TABLE

Planks can be rotated to four surfaces when needed. Steel end caps prevent plank end damage and gives extra long life. Planks can be furnished natural or stained redwood finish. 2-3/8” OD galvanized steel pipe frames with 3” x 2” x 3-1/16” angle supports and steel top and seat caps. 2” x 10” nominal planks.


ModelDescriptionTop SizeTop HeightSeat HeightOverall WidthWeightPriceDownload3D Download
DW-6Dbl. Plank30” x 72”29-1/2”17-1/2”65"350 lbs.$1,035.00
DW-8Dbl. Plank30” x 96”29-1/2”17-1/2”65"420 lbs.$1,182.00
DW-FFrame and Braces Only140 lbs.$494.00
Indicate Table Length 6' or 8'


“4 LIVES” DOUBLE PLANK PARK BENCH

(For permanent style, add “PS” to model #) Utilizes combination of 2-3/8” OD galvanized steel pipe and 2” x 6” double Southern Yellow Pine to make a rugged park bench that will withstand years of heavy use. All frames, braces and end caps are black powder coated finish.


ModelDescriptionLengthFramesGround SpaceWeightPriceDownload3D Download
DW-PB-6Dbl. Plank6'22’ x 6’148 lbs.$541.00
DW-PB-8Dbl. Plank822’ x 8’197 lbs.$648.00
DW-PB-PPortable Frames Only55 lbs.$306.00
DW-PB-PSDirect Bury Frames Only53 lbs.$306.00


“4 LIVES” DOUBLE PLANK YARD BENCH

Utilizes 2” x 6” double planked Southern Yellow Pine along with a heavy duty 4” x 4” square tubing leg with a 12” x 12” x 1/4” steel plate, with a 3” x 2” x 3/16” angle seat support. Frame and end caps are black powder coated finished.


ModelDescriptionLengthFramesGround SpaceWeightPriceDownload3D Download
DW-YB-6Dbl. Plank6'22\1’ x 6’87 lbs.$380.00
DW-YB-8Dbl. Plank8'21’ x 8’116 lbs.$430.00
DW-YB-PSurface Mount Plate Frame Only40 lbs.$211.00
DW-YB-PSDirect Bury Frame Only45 lbs.$211.00


Double Plank Bench Caps !

Top, seats and end caps are 3” x 2” x 3/16” steel angle iron with black powder coat finish.

Steel end caps are removed to allow for the double planks to be rotated and then easily re-assembled to protect plank ends from cracking or damage. This feature, along with the double planking, gives you “4 lives” from our tables and benches.

3” x 2” x 3/16” steel end caps provide ultimate protection to the plank ends and prevents warpage.

Aluminum/Wood Site Benches

Each bench has a single plank on hot dipped galvanized frames made from 3” x 3/16” thick steel with 1” OD galvanized pipe braces. Comes with 2 styles of pedestal frames. (For Direct Bury frames, add “FC” to model #). Direct Bury, or with a 6” x 6” plate for attachment to existing decks. Frames are 1-5/8” OD galvanized pipe. Aluminum planking used for seats and tops on both tables and benches are 2” x 10” (9-1/2” x 1-3/4” ) extruded aluminum alloy 6063T6 with a clear anodized finish as per AA-M10L22A31 Class II (204R1) 0.4 mil minimum thickness to resist corrosion and stains. The aluminum planks come with roto-molded end caps. 2” x 12” aluminum seats available at additional cost. L.A. Steelcraft uses 60% recycled aluminum in our aluminum benches and tables.

PBW-PF6

PLAYER BENCH

All Weather2” x 1” x 3/16” frame, channel welded to 1-5/8” OD galvanized steel pipe. This bench is for direct bury application used for dugouts and as Permanent player benches.


Model DescriptionLengthFramesGround SpaceWeightPriceDownload3D Download
PBA-PF8Aluminum7’-6”22’ x 7-1/2’52 lbs.$493.00
PBA-PF15Aluminum15’42’ x 15’104 lbs.$968.00
PBW-PF6Wood6'22’ x 6’64 lbs.$410.00
PBW-PF8Wood8'22’ x 8’78 lbs.$498.00
PBW-PF15Wood15’42’ x 15’149 lbs.$943.00
PBA-PFFormed Channel and Pipe Frame (Aluminum)22 lbs.$137.00
PBW-PFFormed Channel and Pipe Frame (Wood)22 lbs.$137.00


PLANK YARD BENCH

Each bench has a single plank on hot dipped galvanized frames made from 3” x 3/16” thick steel with 1” OD galvanized pipe braces.

ModelDescriptionLengthFramesGround SpaceWeightPriceDownload3D Download
YBA-8Aluminum7-1/2’215” x 7-1/2’36 lbs.$309.00
YBA-15Aluminum15'415” x 15’74 lbs.$634.00
YBW-6Wood6'215” x 6’42 lbs.$249.00
YBW-8Wood8'215” x 8’49 lbs.$280.00
YBW-15Wood15'415” x 15’95 lbs.$541.00
YBF-AFrame for Aluminum Planking per pair21 lbs.$114.00
YBF-WFrame for Wood Planking per pair21 lbs.$114.00

YBW-6 YBA-8

LBA-8P

PLANK PLAYER/LOCKER ROOM BENCH

Comes with 2 styles of pedestal frames. (For Direct Bury frames, add “FC” to model #). Direct Bury, or with a 6” x 6” plate for attachment to existing decks. Frames are 1-5/8” OD galvanized pipe.

ModelDescriptionLengthFramesGround SpaceWeightPriceDownload3D Download
LBA-8PAluminum7-1/2’21’ x 7-1/2’33 lbs.$339.00
LBA-15PAluminum15’41’ x 15’66 lbs.$607.00
LBW-6PWood6'21’ x 6’39 lbs.$252.00
LBW-8PWood8'21’ x 8’46 lbs.$320.00
LBW-15PWood15’41’ x 15’89 lbs.$516.00
LB-FPFrame only with Plate per pair18 lbs.$102.00
LB-FCFrame only for Direct Bury per pair8 lbs.$87.00

PLAYER BENCH WITH BACK

(For Direct Bury Frames, add “FS” to model #) Mounted on 2-3/8” OD frame of galvanized pipe. Braces are 1” OD galvanized  pipe. Ideal for dugouts and team benches.

PBW-6P

Shown with our two types of wood available. Stained or untreated.


ModelDescriptionLengthFramesGround
Space
WeightPriceDownload3D Download
PBA-8PAluminum7-1/2’22’ x 7-1/2’77 lbs.$598.00
PBA-15PAluminum15’42’ x 15’148 lbs.$1,118.00
PBA-36PAluminum36’72’ x 36’355 lbs.$2,220.00
PBW-6PWood6'22’ x 6’89 lbs.$461.00
PBW-8PWood8'22’ x 8’103 lbs.$534.00
PBW-15PWood15’42’ x 15’193 lbs.$954.00
PBP-FSDirect Bury Frame per pair45 lbs.$207.00
PBP-FPPortable Frame per pair47 lbs.$231.00

PORTABLE PARK BENCH

2” x 1” x 3/16” frames, channel welded with 1/2” rod support. Hot dipped galvanized after fabrication. Braces are 1” galvanized pipe. This portable park bench is great for tennis courts and site furnishings.

PBA-C8


ModelDescriptionLengthFramesGround
Space
WeightPriceDownload3D Download
PBA-8PAluminum7-1/2’22’ x 7-1/2’77 lbs.$598.00
PBA-15PAluminum15’42’ x 15’148 lbs.$1,118.00
PBA-36PAluminum36’72’ x 36’355 lbs.$2,220.00
PBW-6PWood6'22’ x 6’89 lbs.$461.00
PBW-8PWood8'22’ x 8’103 lbs.$534.00
PBW-15PWood15’42’ x 15’193 lbs.$954.00
PBP-FSDirect Bury Frame per pair45 lbs.$207.00
PBP-FPPortable Frame per pair47 lbs.$231.00

SKATE STOPPERS FOR WOOD & ALUMINUM BENCHES

Skate Stoppers protect your benches from the damage skateborders can do. These Stoppers are specially designed for wood and aluminum surfaces. Suggested to be used every 6” inches along the rails of seats. For additional information see page 70. Sold in kits of 20, 60, 100 or 250. All kits include application hardware.

Aluminum/Wood Site Tables

TP-2A-90

PRESTIGE RECTANGLE TABLE

This unit is for direct bury application. Frame: 3” x 3” pedestal with 2” x 2” bench pedestal. Black powder coat finish. 2 benches per frame.


ModelDescriptionTop SizeTop HeightSeat HeightOverall WidthWeightPriceDownload3D Download
TP-2A-45Aluminum30” x 45”30”18”65”108 lbs.$938.00
TP-2A-72Aluminum30” x 72”30”18”65”130 lbs.$1,117.00
TP-2A-90Aluminum30” x 90”30”18”65”145 lbs.$1,188.00
TP-2W-48Wood30” x 48”30”18”65”140 lbs.$826.00
TP-2W-72Wood30” x 72”30”18”65”175 lbs.$986.00
TP-2W-96Wood30” x 96”30”18”65”210 lbs.$1,036.00

TP-4W-38P

PRESTIGE SQUARE TABLE

All WeatherFrame: 3” x 3” pedestal with 2” x 2” bench pedestal. Black powder coat finish. 4 benches per frame.


ModelDescriptionTop SizeTop HeightSeat HeightOverall WidthWeightPriceDownload3D Download
TP-4A-38SDir. Bry-Alum38” x 38”30”18”66”165 lbs.$1,118.00
TP-4A-38PSur. Mnt-Alum38” x 38”30”18”66”155 lbs.41,175.00
TP-4W-38SDir. Bry-Wd38” x 38”30”18”66”175 lbs.$1,021.00
TP-4W-38PSur. Mnt-Wd38” x 38”30”18”66”165 lbs.$1,047.00
4W-PFrame only Surface Mount80 lbs.$449.00
4W-SFrame only Direct Bury80 lbs.$449.00


PEDESTAL FRAME DESIGN

1-5/8” OD galvanized steel pipe frames. Built to seat 4 comfortably. Perfect for small families or tight areas. Meets the needs of fast food industry. This table should be used in a fixed location with frame anchored. Comes with Roto-molded end caps.

ModelDescriptionTop SizeTop HeightSeat HeightOverall WidthWeightPriceDownload3D Download
TP4-TBAAluminum30” x 48”30”18”60”78 lbs.$698.00
TP4-TBWWood30” x 48”30”18”60”90 lbs.$631.00
TPA-4FFrame only set38 lbs.$202.00

Aluminum Tables

EXTRA STRENGTH ALUMINUM TABLE

All WeatherExtra strength to support extra weights and severe usage. 1-5/8” OD tubular galvanized steel pipe frames. Seat support bracing 1-1/16” OD galvanized pipe with 1/2” tie bars. Galvanized foot pads welded to leg frames for added stability. Comes with Roto-molded end caps.

TPA-3030


ModelDescriptionTop SizeTop HeightSeat HeightOverall WidthWeightPriceDownload3D Download
TPA-3026Junior30” x 90”26"30” x 90”65”155 lbs.$1,016.00
TPA-3030Adult30” x 90”30"18”65”160 lbs.$$1,016.00
TP-30FAFrame only- Specify Adult or Junior85 lbs.$433.00


TPA-8A

STANDARD ALUMINUM PLANK TABLE

1-5/8” OD galvanized pipe frames with top supports of 1-1/2” x 1- 1/2” x 3/16” angle iron. Braces are 1” OD galvanized pipe. Each table has five planks with two end frames and braces. Comes with Rotomolded end caps.


ModelDescriptionTop SizeTop HeightSeat HeightOverall WidthWeightPriceDownload3D Download
TPA-8AAdult30” x 90”28-1/2”18”65”135 lbs.$903.00
TPA-8JJunior30” x 90”25”15-1/2”65”131 lbs.$903.00
TPA-GAFrame only- Specify Adult or Junior52 lbs.$290.00


THE “TOUGH ONE” ALUMINUM TABLE

The “Tough One” in aluminum for heavy duty demands for parks and recreation areas. Frame: Choices of 1-5/8” OD or 2-3/8” OD galvanized steel pipe, welded end frames with top angle iron plank holder. Bracing 1” OD on S frames; 1-1/4” OD on HD frames. Comes with Roto-molded end caps.

TPA-8S


ModelDescriptionTop SizeTop HeightSeat HeightOverall WidthWeightPriceDownload3D Download
TPA-8S1-5/8”30” x 90”29”18”64”153 lbs.$950.00
TPA-8HD2-3/8”30” x 90”29”18”64”168 lbs.$1,007.00
W-SAFrame only per set78 lbs.$364.00
W-HDAFrame only per set93 lbs.$422.00


TRADITIONAL HEAVY DUTY PICNIC TABLE WITH BENCHES

2-3/8” OD galvanized frames. Bracing: 1” OD galvanized steel pipe. All welded end frames with angle top and seat supports. Comes with Roto-molded end caps.


ModelDescriptionTop SizeTop HeightSeat HeightOverall WidthWeightPriceDownload3D Download
TPA-HD2-A2-3/8” Frame30” x 90”29"18"68"175 lbs.$987.00
HD-2AFrame only per set100 lbs.$407.00


SKATE STOPPERS FOR WOOD & ALUMINUM TABLES

Skate Stoppers protect your benches from the damage skateboarders can do. These Stoppers are specially designed for wood & aluminum surfaces. Suggested to be used every 6” inches along the rails of seats. For additional information see top of page. Sold in kits of 20, 60, 100 or 250. All kits include application hardware.

Expanded Metal Tables & Benches

Heat treated Plastisol is the toughest finish on site furnishings. It is permanently bonded to the expanded metal and structural steel to a thickness of 1/4” (25-30 times thicker than paint). Open weave design discourages standing water, graffiti and carving. Seat planks are 2” thick x 10” wide. Tops are 2” thick x 32” wide. All frames powder coated: Blue, Black, Green or Brown. Plastisol colors: Blue, Green, Brown Red and Beige. Expanded Metal ships from Indiana, 46982.

SUPER RUGGED EXPANDED METAL TABLE

This is a super rugged table with all welded end frames of 2-3/8” OD pipe and 1-1/4” OD steel pipe braces. Powder coated frames and braces.

TPP-28

ModelDescriptionTop SizeTop HeightSeat HeightWeightPriceDownload3D Download
TPP-26Expnd Mtl.32” x 72”29”18”235 lbs.$1,081.00
TPP-28Expnd Mtl.32” x 96”29”18”276 lbs.$1,168.00

All Weather

LPP-8SM

EXPANDED METAL PLAYERS BENCH

Players Bench. 2-3/8” OD steel frames. “SM” frames have plate welded to the post for surface mount applications. Players bench ideally suited for dugouts, athletic fields and also site furnishings. Powder coated frames and braces.

ModelDescriptionLengthFramesGround SpaceWeightPriceDownload3D Download
LPP-6PFPortable6’21’ x 6’62 lbs.$459.00
LPP-6IGIn Ground6’21’ x 6’64 lbs.$459.00
LPP-6SMSurface Mount6’21’ x 6’68 lbs.$459.00
LPP-8PFPortable6’21’ x 8’72 lbs.$489.00
LPP-8IGIn Ground6’21’ x 8’74 lbs.$489.00
LPP-8SMSurface Mount6’21’ x 8’78 lbs.$489.00

PLAYERS BENCH W/ BACK REST

Players Bench with back rest, 2-3/8” OD frames. “SM” frames have plate welded to the post for surface mount applications. Players benches ideally suited for dugouts, athletic fields and also site furnishings. Powder coated frames and braces.

BPP-8SM


ModelDescriptionLengthFramesGround SpaceWeightPriceDownload3D Download
BPP-6PFPortable6’26’ x 30”126 lbs.$631.00
BPP-6IGIn Ground6’26’ x 30”122 lbs.$631.00
BPP-6SMSurface Mount6’26’ x 30”120 lbs.$631.00
BPP-8PFPortable6’26’ x 30”142 lbs.$679.00
BPP-8IGIn Ground6’26’ x 30”146 lbs.$679.00
BPP-8SMSurface Mount6’26’ x 30”140 lbs.$679.00


ULTRACOAT” thermoplastic coated steel tables are the new choice in coatings for steel tables and benches. The application of Ultracoat by a fluidized powder bed, causes the powder to melt to the steel at 500 degrees Fahrenheit. The coating, which is PVC free, is approximately 50 MILS and ideal for site furnishings. The process allows bonding of the coating to steel that is nearly indestructible and the smooth gloss finish makes a very good looking product that is easy to maintain. Tops, seats and frames offered in: Green, Blue, Red, Brown, Black, Beige and Burgundy. Tops and seats have Ultracoat finish and the frames have a baked on powder coat finish. The open weave diamond pattern expanded metal material for the tops and seats is 9-gauge with 3/4” openings and comes standard with an umbrella hole on round and square tops. Frames utilize a 1-5/8” heavy wall tubing for the portable style tables and 4” x 4” square tubing for the surface mount or direct bury styles. Ships from: IL 62278.

TPP-46SQ

SQUARE EXPANDED METAL TABLE

ModelDescriptionTop SizeSeat SizeFrame SizeTable HeightSeat HeightWeightPriceDownload3D Download
TPP-46SQPortable46”12” x 36” Concave1-5/8”30”18-1/4”187 lbs.$1,147.00
TPP-46RD-SMSurface Mount46”12” x 36” Concave4” x 4”30”18-1/4”251 lbs.$1,362.00
TPP-46SQ-IGIn Ground46”12” x 36” Concave4” x 4”30”18-1/4”251 lbs.$1,362.00

ROUND EXPANDED METAL TABLES

ModelDescriptionTop SizeSeat SizeFrame SizeTable HeightSeat HeightWeightPriceDownload3D Download
TPP-46RDPortable46”12” x 36” Concave1-5/8”30”18-1/4”187 lbs.$1,199.00
TPP-46RD-SMSurface Mount46”12” x 36” Concave4” x 4”30”18-1/4”251 lbs.$1,345.00
TPP-46RD-IGIn Ground46”12” x 36” Concave4” x 4”30”18-1/4”251 lbs.$1,345.00

NEW GARDEN UMBRELLA FOR EXPANDED METAL TABLES!! SEE FURTHER DOWN PAGE

TPP-46RD

ADA EXPANDED METAL TABLES

ModelDescriptionTop SizeSeat SizeFrame SizeTable HeightSeat HeightWeightPriceDownload3D Download
TPP-46SQ-ADA*Square-ADA Portable46” x 54”12” x 36”1-5/8”30-1/2”18-1/4205 lbs.$1,149.00
TPP-46SQ-ADA-SMSquare-ADA Surface Mnt46” x 54”12” x 36”4” x 4”30-1/2”18-1/4220 lbs.$1,180.00
TPP-46SQ-ADA-IGSquare-ADA In Ground46” x 54”12” x 36”4” x 4”30-1/2”18-1/4220 lbs.$1,180.00
TPP-46RD-ADA*Round- ADA Portable46”12” x 36” Concave1-5/8”30-1/2”18-1/4195 lbs.$1,149.00
TPP-46RD-ADA-SMRound- ADA Surface Mnt46”12” x 36” Concave4” x 4”30-1/2”18-1/4209 lbs.$1,205.00
TPP-46RD-ADA-IGRound- ADA In Ground46”12” x 36” Concave4” x 4”30-1/2”18-1/4209 lbs.$1,205.00
TPP-28-ADA*30” x 96” Rectangle ADA Portable30” x 96”12” x 72”2-3/8”30-1/2”18-3/4”254 lbs.$1,088.00

TPP-46RDADA-SM

TPP-28-ADA

* These tables should be used in a fixed location with frames anchored. Square and round accessible (ADA) tables have 3 seats per table.

Umbrellas

FIBERGLASS ROUND UMBRELLA

Made of maintenance free fiberglass, with heavy duty anodized aluminum staff (1-1/2” OD) and adjustments for time-of-day shading. Colors to match all L.A. Steelcraft standard fiberglass colors, not polished granite finishes. (Colored background with white star as shown). Pipe mast locks into furnished PVC ground sleeve. Requires 1 hole in table top.

ModelDiameterWeightPriceDownload3D Download
FRB-6 Fiber6'67 lbs.$557.00
FRB-7 Fiber7'73 lbs.$597.00

FRB-7 top

FRB-7 sideTable sold separately. See top of page for details.

ALUMINUM ROUND UMBRELLA

Aerodynamically designed, these umbrellas feature swivels that make them virtually topple-proof. The swivel permits easy turning of the umbrellas for maximum shade. Umbrella has a sturdy 7’ diameter frame with aluminum braces and ribs for lasting durability. Designed to fit any standard table with one center hole, the umbrella’s 1-1/2” OD mast pipe locks into a furnished PVC ground sleeve.
Panel Colors Available: White, Royal Blue, Camel, Red, Vanilla, French Blue, and Seafoam. Note: Aluminum umbrella colors do not match fiberglass colors but are complimentary. Aluminum Umbrellas ship from factory in Arizona, 85019.

ModelDiameterWeightPriceDownload3D Download
SCU-77'70 lbs.$1,017.00

SCU-7

FIBERGLASS- RECTANGLE “RECTA-BRELLA”

Now you can have shade for your traditional rectangle tables. Available in all L.A. Steelcraft colors (mix and match). The poles are 1-5/8” OD galvanized pipe. Shown with model TP8-FA. Requires 2 holes in table top.

RB-F

RB-F 2Table sold separately. See top of page for table.
Not available for 6’ table.
Recommend anchoring at a fixed location.

ModelDimensionWeightPriceDownload3D Download
RB-F6’ x 8’153 lbs.$836.00

GU75WT-M

GARDEN UMBRELLAS

The Garden Umbrella adds the needed protection from the sun for all of the round and square expanded metal tables. Works with expanded metal tables only. With all the color options available you can match the colors of the tables to suit your taste. Includes manual or crank opening, aluminum poles, and textiline closed weave fabric. Available solid or alternating color options: Blue, Green, Yellow, Red, Burgundy and Beige

ModelDiameterWeightPriceDownload3D Download
GU75CWT-C (Crank Open)7-1/2’ Diameter with Closed Weave20 lbs.$543.00
GU75CWT-M (Manual Open)7-1/2’ Diameter with Closed Weave20 lbs.$543.00

Textiline Closed Weave Fabric